Restores 100% white items stained by colour runs

Dylon colour Run Remover removes colour runs to restore whites to brilliant perfection, so
now you can reclaim your pristine whites and wave goodbye to colour run stains for good!
One sachet is sufficient to treat up to 500grams of fabric (e.g. 2 shirts) and is suitable for all
washable fabrics including wool & silk. For use on 100% whites only. The non-chlorine
bleach formula will not damage or yellow fabrics and it’s safe for use on white T-shirt s with
printed logos or images.

DIRECTIONS FOR USE IN TOP LOADING MACHINES

• Set to hottest wash cycle fabric care label allows (for best results 60°C hot water) & lowest water level to cover fabric. Start cycle.
• For top loading machines, add contents of 1-3 sachets when machine is full. (1 sachet for a weak solution and 3 for when a stronger treatment is required.)
• Agitate for 1 minute and then add damp fabric.
• After a few minutes stop machine, leave to soak, agitating occasionally.
• Allow cycle to finish. Add usual washing detergent and wash & dry as usual.

DIRECTIONS FOR HANDWASH

• Fill plastic container or sink with the hottest wash cycle fabric care label allows (for best results 60°C hot water) & lowest water level to cover fabric.
• Add contents of one sachet & stir thoroughly, add the items
• Leave to soak for at least 1 hour, stirring regularly.
• Rinse thoroughly. Wash and dry as usual.

GENERAL TIPS

• Always treat colour runs when they are fresh if possible
• Embroidery threads and patch logos may not be safe depending on the type of thread used.
• Colour ‘runs’ that appear in patches or blotches can be much more difficult to remove. This is a direct transfer of concentrated dye i.e. ‘spot dyeing’ and could permanently ‘colour stain’.
• Strong discolouration may need a second treatment or two sachets by hand.

top